The friction of the smooth agent of automatic assembly automatic equipment can increase the abrasion of the abrasion and tear of the hard grain wear, appearance corrosion and metal surface. Therefore, when the friction surface asks for sufficient smoothing agent, it can form a good smooth condition, prevent the damage of the oil film, adhere to the precision of the parts, so as to reduce the wear greatly.

(1) lower temperature

Automatic assembly automatic equipment smooth agent can reduce friction coefficient and reduce friction. We know that all the work done by the machine that runs is turned into heat, which is partially dispersed from the body, and from time to time the temperature of the machine is lowered. The concentrated circulation of liquid smoothing agent can remove the heat generated by friction and play the role of cooling and cooling, so that the machine can operate within the required temperature range.

(2) avoid corrosion and maintenance of metal appearance.

Automatic assembly machine machine automation machinery appearance shall not prevent the earth and surrounding medium (such as air, water, dampness, moisture, corrosive gas and liquid, etc.) contact to the metal surface rust, corrosion and damage of the machine. In particular, the metallurgical plant's low - temperature car and chemical plant corrosion wear is more serious.

Smooth oil or grease has no corrosive effect on metal and can isolate moisture from humid air and the corrosion of harmless media. We apply a layer of oil or grease to the metal surface of the machine with anti-corrosion and anti-rust additives, which can act as anticorrosion, rust prevention and maintenance of metal appearance.