Bending machine is a kind of can be carried out on the thin plate bending machine, the structure mainly includes the bracket, workbench and clamping plate, workbench on the scaffold, workbench consists of base and the clamp, the base through the hinge is connected with the clamping plate, the base is composed of shell, the coil and plate, coil placed inside the shell of the sag, the depression at the top of the cover plate. When used, the wire is electrically charged to the coil, and the power is generated to generate gravity to the pressure plate, so as to realize the clamping between the laminated plate and the base. Because of the electric magnetic clamping, it can be used to make a variety of workpiece requirements, and it can be processed to the workpiece of the side wall, and it is very simple to operate. 

The hydraulic bending machine can be divided into two modes: torsion shaft synchronization, machine fluid synchronization, and electro-hydraulic synchronization. According to the mode of motion can be divided into: up and down type. 

Bending machine including stent, workbench and clamping plate, workbench on the scaffold, workbench consists of base and the clamp, the base through the hinge is connected with the clamping plate, the base is composed of shell, the coil and plate, coil placed inside the shell of the sag, the depression at the top of the cover plate. 

When used, the wire is electrically charged to the coil, and the power is generated to generate gravity to the pressure plate, so as to realize the clamping between the laminated plate and the base. Because of the electric magnetic clamping, it can be used to make a variety of workpiece requirements, and the workpiece can be machined. Bending machine can be used to meet the requirements of various workpieces by changing the bending machine tool. 

The bending machine is divided into manual bending machine, hydraulic bending machine and CNC bending machine. The manual bending machine is divided into mechanical manual bending machine and electric manual bending machine. The hydraulic bending machine can be divided into two modes: torsion shaft synchronization, machine fluid synchronization, and electro-hydraulic synchronization. Hydraulic bending machine can be divided into two types: upper moving and lower moving. 

Bending machine 

Shenzhen yonglun automation equipment co., LTD., which began planning at the end of 2015, is trying to set up at the beginning of this year. Company has been focused on: automatic assembly and detection equipment, roll forming machine, punching, punching manipulator feeder, automatic can molding machine, punch surrounding equipment such as research and development design, manufacture, installation and debugging and technical services. Based on the advantages of core technology and system integration, the company provides customers with complete production planning and layout plan for production workshops. 

In 2016, due to the factory floor area, the company caused the backlog of orders, which could not be delivered to customers by time. Although the customer strongly supported the company, it was also a great loss for us to delay the production of customers. So decided to move the plant from longhua to the public water port at the end of the year. 

Company in the next ten years planning: three years to become the national large-scale automation equipment manufacturers, in five years to become the country's most powerful intelligent equipment manufacturers, product sells the world, ten years to one of the top five. 

The main products of the company: nuts and bolts inspection machine, automatic assembly and testing sets, rolling machine, stamping manipulator, stamping feeder, automatic pot forming machine, etc. 

The tenet of the company: customer satisfaction is my pursuit; The quality of our products is our bottom line. 

Company name: shenzhen yonglun automation equipment co. LTD 

Contact person: pu yonggang (general manager) 

Phone: 15816868491 

E-mail: 1660780726 @qq.com 

QQ: 1660780726 

Address: building 2, wenge industrial park, gongming town, shenzhen city, guangdong province