Full automatic group installation, the equipment is fast, high precision, the tooth can be detected by the tooth regulation.It can be operated at high speed and continuous cycle, the special motor can be durable and can be automated, the tooth distance type automatic tapping machine can operate multiple devices at the same time, which can significantly save labor cost!?

The characteristics of automatic group installation

1, the working principle: forward - reversal - forward - reversal - continuous loop and forward - reversal - stop one-directional button switches to a certain operation, also can install foot switch, for selective operation, continuous, one-way, circulation can be automatically.The operator can leave the machine completely, realize the automatic work, the beginners can also operate smoothly.

2, automatic tapping machine High-precision tapping stroke; easy adjustment, automatic reversing mechanism can free adjustment tapping stroke, shallow holes and have low holes machined part also can be easy to adjust, double safety device can prevent damage of the tap, and fluctuation of spindle, cutting AD hoc double safety clutch, spindle can automatically stop, reversed return will not damage the cutting tool.

3, tooth gear with A, B, B axis and spindle, according to the tooth pitch propulsion fully compatible with the vertical stability, high precision, precision special, tap tooth forward and backward without output can function properly.But at the same time, decide on the fine processing items, do not cause coarse and different threads, for the thin plate and the lightweight metal, synthetic resin and other soft materials can also attack the perfect thread.At the same time, multi-axis synchronous machining can be configured and the production efficiency is greatly improved.

Pneumatic tapping machine is driven by compressed air, safe and fast and efficient;Low pressure and gas volume (0.3-0.8 mpa), outsize torque output;It can attack the silk of various kinds of steel, iron, copper, aluminum and plastic.The tube is equipped with overload protection device, with less damage to the wire and high precision of the screw.Easy to operate, without experience and power;The milling machine with the tapping device or manual tapping is much lower;Heavy work items do not need to be positioned or moved, the working area is large;Locate fast and high cutting speed and increase production