The maintenance of non-standard automation equipment can help extend the service life of non-standard equipment and make the equipment use more accurately. Let's take a look at the maintenance of non-standard automation equipment

First, the machine, open the device and adjust the inversion of organization, attention should be paid to ensure that the non-standard automation equipment ChuDu to center line parallel to the center line of the gear, should be suitable for the Angle of good, useful to ensure that the machines in the work well.

Second, our equipment should always check the maintenance and cohesion of each part, such as loose should be tightened. The body connecting bolt should be used to check the slack when the body is under pressure. Gradually smooth out the first parts.

Third, replace easily worn spare parts, if there is a problem we need to remove the problem and keep running, the motor bearing lubrication should be outstanding. Often check all wires, cables for any damage. There is some damage to the timely bandage and replacement. Useful extension machine maintenance.

Active counting function is used in the production process of full active plug-in machine. Apart from being able to make a PIN PIN, the machine can bend the PIN to a 90-degree bend (i.e., "L" PIN). This machine is widely used in electronic transformer coil frame (glue core), relay coil core and other plastic or electric wood products.

1. The speed of pin insertion is 50 pieces/min. The needle is inserted without the need for the needle. The output of a single machine is equal to the output of more than 20 workers a day.

2. The full active pin machine is suitable for the pins of LED dot matrix board, LED digital tube circuit board pins.

3. The machine adopts PLC program control, man-machine interface operation.

4. The pins of the PCB will not be the product of the needle, and the needle will have a seizure of the defective products, such as the removal of tin and the surface oxidation of the needle.

5. The fully active insert needle machine is fast and the capacity is high. The machine has a short time. The return of this money will greatly reduce the cost of the labor.

6. Our company can also provide the service of OEM. The offer is cheaper than the current offer