Plug automatic assembly machine performance:
1, the plug automatic assembly machine for the company has its own independent intellectual property rights, the company after 3 years of successful research and development, now that the fourth generation of improved products, especially in the operation and maintenance is simple, stable performance on the outstanding. (2), cover, bottom cover screws, assembly speed: 1300pcs / h, the bottom cover, the branch, the branch, the branch, the branch, the nine, the insurance tube, The use of turntable shift structure, the cylinder with the vibration of automatic feeding, automatic assembly, just manual feeding.
2, touch screen display interface, easy to operate, easy maintenance, lack of material or fault automatic alarm shutdown.
3, PLC program control
The same time as the above-
Plug automatic assembly machine technical parameters:
1, the control mode: programmable logic controller (PLC) and touch screen parameter settings.
2, the detection method: fiber amplifier, close, automatic detection of magnetic switch.
3, work: automatic / manual / single-station cycle.
As shown in Figure 4, the feed mode: vibration plate automatically sort feed.
5, daily capacity: 12000pcs, according to 10 hours / day calculation.
6, power: 220V 50-60HZ gas source: 0.5 + 0.1Mpa.
Power plug automatic assembly machine performance, function and description
1. The main body of the plastic vibration plate material automatically feeding, the terminal vertical discharge.
2. Each module assembly of a product, sub-dial for circular motion.
3. Machine can be a number of downtime, lack of material alarm.
4. Molding and the use of workpiece SKD11 material, the workpiece surface hard chrome plating.
5. Production capacity is about 3000 or more per hour.
The same time as the above-
Features:
First, the vibration plate automatically for plastic feeding
Bay automatic feeding, pushing material, send end, pinch off, cut end, plug, riveting pressure, cutting tape and so on
Automatic detection of downtime alarm
Day Japan's Mitsubishi PLC, 7-inch color touch screen, the use of hydraulic system for external processing
Capacity: 1 per module, 3600PCS / Hou
Manpower: 1 person / station
Mechanical size: about 1500x500x1300mm
Electricity / gas use: 220V / 5-7KGF / c ㎡ air flow 100L / MIN
